Crystallisation Control for Fluorine-free Metallurgical Slags - Jeferson Leandro Klug - 書籍 - LAP LAMBERT Academic Publishing - 9783659622724 - 2014年10月17日
カバー画像とタイトルが一致しない場合、正しいのはタイトルです

Crystallisation Control for Fluorine-free Metallurgical Slags

価格
¥ 5.882
付加価値税なし(お届け先:Japan)

遠隔倉庫からの取り寄せ

発送予定日 年12月14日 - 年12月24日
クリスマスプレゼントは1月31日まで返品可能です
Jeferson Leandro Klug の新しいリリースのお知らせを受け取る
iMusicのウィッシュリストに追加

まだ評価がありません

The continuous casting process is applied to the majority of steel grades by most steel manufacturers. Good understanding and control of phenomena in the mould during production of steel are essential to the success of the process. The slags used in the mould are very important when considering casting results, e.g., the quality of the steel slabs and ?sticking severity?. The mould slags ultimately have an influence on the capacity of the caster, i.e., how fast it is possible to cast with a good quality and without breakouts caused by sticking. During continuous casting process, the presence of crystals in mould slags has a decisive effect on both the lubrication and the heat transfer rate between the mould and the steel strand. Once the mould powder is melted on the top of the liquid steel and the mould slag infiltrates between the mould and the strand surface, the liquid slag is exposed to different cooling paths that can promote or prevent crystallisation. In fact it is common to see glassy parts of the slag in areas of high cooling rates with crystalline fractions at lower cooling rates. In the present work crystallisation behaviour for fluorine-free slags is discussed.

メディア 書籍     ペーパーバック・ボグ   (ソフトカバーで背表紙を接着した本)
リリース済み 2014年10月17日
ISBN13 9783659622724
出版社 LAP LAMBERT Academic Publishing
ページ数 104
寸法 150 × 220 × 10 mm   ·   173 g
言語 ドイツ語